Yes I have the upper crash bars (DB parts) and installed the high fender.
Your assumption is correct. The fender will hit the bars.
Easy fix though. You need to use a little plate and a couple of longer screws to lower the high fender a little bit.

 

Thanks for that perfect reply. I will pick up my new Norden with the high fender already attached in a couple of days. I was looking for that exact crash bar and was wondering if that will fit. Thanks for showing your easy fix with that little plate. Guess I´ll copy your way.

 

Good luck, I'm not sure 100% if it will or wont fit, but I know the high fender takes up all of the bolts where the front brake lines fit up to...

 

Has anybody found a Crosspro dealer in the US? The upper bar freight is almost twice the cost of the unit per their website. Any other options in the US for only the upper crash bars?

 

thanks a lot, i ll have to have the plate made i guess. Thanks for the pics too!
my fork travel is 240mm so i ll just measure the distance as you did!
Can i leave the stock fork guards? my set came with the orange guards...

 

in the second picture that shows the spacers, i don't see the back part of the fender? the one with holes to let air into the radiator? did you cut it out?

 

This is the fender kit I got. You can see the cut outs I believe you are referring too

It comes with the fork guards because they mount a bit differently than the stock ones. The stock ones connect directly to the low fender. Without it they won't be stable enough.

Husqvarna Norden 901 High Front Fender Kit | BFD Moto Canada

Husqvarna Norden 901 High Front Fender Kit available at BFD Moto. Free shipping on orders over $100 anywhere in Canada! Find dirt bike/ snow bike/ adventure touring/ street bike parts and accessories, Husqvarna Motorcycle Accessories, motorcycle tires, riding gear, oil, apparel and more at...

bfdmoto.com

 

yup that s the kit. Unfortunately the white one was on back order so i went for the white fender/orange guarda hoping i could just leave the stock guards on but now i've learned i cannot since they won t be stable enough.
thanks for all the info, much appreciated 👊

 

I've used this on other parts of the bike. It looks great.

Matte Black Vinyl Wrap Roll with VViViD XPO Air Release Technology (17" x 5ft) : Amazon.ca: Automotive

Matte Black Vinyl Wrap Roll with VViViD XPO Air Release Technology (17" x 5ft) : Amazon.ca: Automotive

www.amazon.ca

 

i ve got the expedition...there is no matt anywhere but thanks for the tip, i may get the glossy version of it. I will first try to return the kit and buy the white/black one if not still on back order! Was it tricky to install the ktm fork guards or intuitive?

 

It's an easy install. You can get that vinyl in a bunch of colors.