Husqvarna Norden Forum banner

Norden 901 Issue - Engine cutting out whilst riding along at 50mph! Help!

2 reading
30K views 104 replies 39 participants last post by  boolean  
I'm starting to think the downshift's the culprit here. I'm still getting used to this bike, not fully dialed in yet. Does anyone know if you can disable the auto-shifting feature? My old Ducati let me turn that off. If I could shut it off, maybe the issue would disappear. I'm leaning towards a problem with the shifting components themselves, rather than the ECU or fuel system.
the quickshifter? Yeah, it’s in the menus. Easy to turn it off.
 
I had engine cut-off twice in 2000 km. Once while downshifting and once while (slowly) upshifting. Both with manual clutch. 1000 km ago the Workshop repeated the quickshifter calibration because shifting with quickshifter was very poor. Since then more issue.
Maybe the quickshifter calibration contain some speed increase during shifting which becomes valid for Manual shifting as well?
I don’t know. The transmission and sensors on the Norden are a bit finicky. I’m not sure how many of my mis-shifts are because of me or the bike. The quickshifter can be a bit flakey. I’ve had mine recalibrated at the dealer and it was better, but I still get the odd mis-shift in the upper gears.

I’ve also started getting into neutral shifting from 1st to 2nd, but that might be the enduro boots I’m wearing. Still working on that.

I had 3 flame-outs on the clutch, but I’m half-convinced it was bad fuel. They happened early on (before my first 1000KMs) and hasn’t happened since. Hopefully it’s just fuel and/or “new bike gremlins”.