[Jonny V]

Finally had time to post some pics. Couple of things done so far.

1) tinted windscreen from Europe…no turn signals yet

2)Black vinyl over all the silver stickers on frame and swingarm

3) Zumo XT. No special mount required!

4) cut off all reflectors and mount on license plate frame.Mounted plate higher up

5) Wings exhaust

6) Removed reflectors on fork guards

7) generic pelican style rear stash box. Lockable and waterproof.

8) enduro engineering hand guards with Cycra shields.

9) Removed peg inserts, rear pegs, rear grab handles, stock mirrors

10) cell mount.

11) Spray ceramic coating on hard surfaces to help repel dirt etc.

 

[sisobmw]

Aj v Slovenskej republike sa pracuje na vylepšeniach.
Tu je zatiaľ nie veľké množstvo:

 

[default]

Very nice. What's the part number on the windscreen and where did you order the EU OEM stuff? I think I found the signals, but need wanted to order the screen at the same time.

 

[sisobmw]

Deflektor je vyrobený v Číne aliexpres. Držiaky kufrov a kufre bighusky.cz

 

[Jonny V]

bought the windscreen from huskymoto. Part number

 

[default]

Thanks. I have the EU windscreen and signals in route from Germany. Have gotten/tried installing the signals? I fear it's more than a plug and play operation.

 

[Jonny V]

Yeah the “American” turn signals don’t really bother me too much now, at least on Norden. And like you not wanting to mess with the very expensive euro ones. Have some yoshimura ones for my wife’s Svartpilin That I will be installing. The stock signals on that bike look silly imo.

 

[metcalfd]

Thanks. I have the EU windscreen and signals in route from Germany. Have gotten/tried installing the signals? I fear it's more than a plug and play operation.

Looking to pick up a set of the EDM signals too. Any chance you can share a part number and maybe the shop where you bought them online? Love to hear how the install goes for you as well

 

[default]

Looking to pick up a set of the EDM signals too. Any chance you can share a part number and maybe the shop where you bought them online? Love to hear how the install goes for you as well

Here is my order from husky-shop24.de (they were the cheapest source I could easily find cause no VAT):

Windschild EU Artikelnummer: 22108008100 Einzelpreis: 87,00 €	1 Stk	87,00 €
	Blinker ECE vo.li/hi.re. Artikelnummer: 21014025100 Einzelpreis: 33,00 €	2 Stk	66,00 €
	Blinker ECE vo.re/hi.li Artikelnummer: 21014026100 Einzelpreis: 33,00 €	2 Stk	66,00 €

I just installed everything, and as I suspected the turn signals do not work. They just stay on since the relay is incorrect or ECU is not programmed for such a low draw. I'm going to throw some resistor on for now, but plan to sort if properly.

Everything looks great, tho 🙃

 

[metcalfd]

Thanks default! I’ll definitely get a set of signals on order. Please let me know what the fix is when you find it!

Here is my order from husky-shop24.de (they were the cheapest source I could easily find cause no VAT):

Windschild EU Artikelnummer: 22108008100 Einzelpreis: 87,00 €	1 Stk	87,00 €
	Blinker ECE vo.li/hi.re. Artikelnummer: 21014025100 Einzelpreis: 33,00 €	2 Stk	66,00 €
	Blinker ECE vo.re/hi.li Artikelnummer: 21014026100 Einzelpreis: 33,00 €	2 Stk	66,00 €

I just installed everything, and as I suspected the turn signals do not work. They just stay on since the relay is incorrect or ECU is not programmed for such a low draw. I'm going to throw some resistor on for now, but plan to sort if properly.

Everything looks great, tho 🙃

Here is my order from husky-shop24.de (they were the cheapest source I could easily find cause no VAT):

Windschild EU Artikelnummer: 22108008100 Einzelpreis: 87,00 €	1 Stk	87,00 €
	Blinker ECE vo.li/hi.re. Artikelnummer: 21014025100 Einzelpreis: 33,00 €	2 Stk	66,00 €
	Blinker ECE vo.re/hi.li Artikelnummer: 21014026100 Einzelpreis: 33,00 €	2 Stk	Thanks default! I’ll definitely get a set of signals on order. Please let me know what the fix is when you find it!

 

[default]

Thanks default! I’ll definitely get a set of signals on order. Please let me know what the fix is when you find it!

Sorry to hijack the post...
I went digging through the bike, but could not find the relay. Found a picture of the location on an older 890 or 790, but they must have moved it. I had some old resistors sitting around, and one per side got the blinkers working. Still plan to ask the dealer about a proper fix.

 

[L.A.Cicero]

Thanks for posting the pix, everything looks nice and tidy. Wondering, did your handguards require any modification to install? Nice that Michigan makes a plate that fits with the Husky livery.

 

[Jonny V]

Thanks for posting the pix, everything looks nice and tidy. Wondering, did your handguards require any modification to install? Nice that Michigan makes a plate that fits with the Husky livery.

If your referring to me (first post) then nothing required to change. I do however use cycra plastic on my EE hand guards as they are a little better looking imo. I have to drill and tap for those holes.

 

[Jonny V]

Also added right mirror too. Have antigravity battery on the bench ready to go as well

 

[KrillOill]

I just installed everything, and as I suspected the turn signals do not work. They just stay on since the relay is incorrect or ECU is not programmed for such a low draw. I'm going to throw some resistor on for now, but plan to sort if properly.

There's a setting the dealer can change from "bulb" to "LED" using the service tool. That might work for you. I installed some generic sequential turn signals from Amazon and they work great, but the indicator on the dash doesn't work. Took it to the dealer to make the switch, but after they switched it using the service tool, the lights hyper-flashed and the dash light started working again (probably wasn't drawing enough amps). I had them switch it back to "bulb" and I just try to remember to turn off my signals.

 

[KrillOill]

By-the-way, can you post a link for the pelican case?