Husqvarna Norden Forum banner
1 - 20 of 28 Posts

·
Registered
Joined
·
13 Posts
With the bike stopped from the menu it's easiest to have your heated grips turned on from the settings menu. If they are not turned on the programming function won't find it, see below.
Automotive tire Automotive lighting Vehicle Light Motor vehicle


From here go back to the settings menu and select quick selector
Reflex camera Digital camera Camera accessory Point-and-shoot camera Camera lens


The pics below show what to do next. I selected the up arrow to program
Motor vehicle Vehicle Automotive tire Light Product

From there the menu takes you to this screen. scroll up untill you find heated grips

Light Sports equipment Plant Motor vehicle Camera accessory


Product Gadget Audio equipment Motor vehicle Cameras & optics


Back out of the menus and all done.
 

·
Registered
Joined
·
138 Posts
Copy all! Thank you. It's unfortunate that you can only program the up/down arrows for quick selection. Right now, I have my "up" programmed for ride mode and "down" for my trip reset. I might have to change the "up" during the winter months to the grips and switch it back to ride mode during the spring/summer/fall. That's if/when I get my grips. Thanks again.
 

·
Registered
Joined
·
10 Posts
The connector for the grips is between the upper and lower triple clamps. It's a white connector with a dummy plug/cap on it. The connector for the control unit is under the seat near the fuse block.

Thank you, mine was behind the radiator, to centre of the fan, had to take off side panel to glimpse the label, then my daughter with small hands and long finger nails was able to retrieve it!
 

·
Registered
Joined
·
138 Posts
How are you guys getting grips now? My dealer said December. I
They have been on order since I bought the bike in May.
I was getting the same from my dealer. Then they showed as "in stock" on AOMC (and they're still showing as available), so I placed an order. (KTM Heated Grip Kit 890 Adventure) But after waiting a couple of weeks, I reached out to see what gives and they said the website is wrong. Looks like they haven't bothered to correct it.

Finally, I had an alert set on eBay for the kit and I got a hit. Seller had two available and I was able to get one. Needless to say, they were gone very quickly. Looks like you might be able to piece the kit together though. The HCU is available...so are the grips (separately).

HCU: Heated Seat Grip Control Module Unit HCU 2022 Norden 901 Husqvarna #T279 A | eBay

Grips: Replacement Heated Grips Norden 901 2022 Genuine Husqvarna KTM 22 #C207 | eBay

Those two items should be all you need.
 
1 - 20 of 28 Posts
Top