Husqvarna Norden Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
this is just to let the community know, since we already have some recurring QC problems like the loose radiator clamp hose, my handlebar bolts were practically hand tightened. The use of my norden is for offroad. I took a small jump and when i hit the ground, the handlebar went all the way down which is pretty dangerous. Please everyone check your bolts and a lil bit of blue loctite for piece of mind.
beside the cooling hose clamp and the handlebar screws, is there something else loose that you are aware of that we have to tighten?
 

·
Registered
Joined
·
12 Posts
this is just to let the community know, since we already have some recurring QC problems like the loose radiator clamp hose, my handlebar bolts were practically hand tightened. The use of my norden is for offroad. I took a small jump and when i hit the ground, the handlebar went all the way down which is pretty dangerous. Please everyone check your bolts and a lil bit of blue loctite for piece of mind.
beside the cooling hose clamp and the handlebar screws, is there something else loose that you are aware of that we have to tighten?
That one is on the dealer since they install the bars. Maybe you’ll get a free first service if you tell them you almost ate it because of their handy work!

Check the mounting hardware on your radiator too.
 
1 - 5 of 5 Posts
Top